Motor paso a paso de circuito abierto DSP de 2 fases de 57 mm

Motor paso a paso de bucle abierto de 2 fases serie de 42 mm  Precisión de paso: 5 % Temperatura: 80 ℃ máx . Temperatura ambiente: -20 ℃-+50 ℃ Resistencia de aislamiento: 100 MΩ Mín. 500 V CC Resistencia a la presión: 500 V CA 1 minuto Desviación radial: máxima 0,02 mm (450 g de carga) Desviación axial: máxima 0,08 mm (450 g ) carga) Especificación Modelo Ángulo de paso (°） Longitud del motor (L) Par de retención (Nm) Corriente nominal (A) Resistencia (Ω） Inductancia (mH) Inercia del rotor (g.cm²） Peso (kg) Cables de motor YK42HB38-02A 1.8 40 0.4 2.0 1.06 2.0 54 0.3 4 YK42HB47-02A 1.8 40 0.48 2.0 1.35 2.9 77 0.32 4 YK42HB60-02A 1.8 40 0.72 2.0 1.8 3.7 110 0.5 4 Dimensiones Dimensiones Modelo Diámetro del eje D (mm) Tipo de eje (mm) Longitud del eje L1 (mm)  YK42HB38-02A 5.0 Clave 0,5*15 24 YK42HB47-02A 5.0 Clave 0,5*15 24 YK42HB60-02A 5.0 Clave 0,5*15  24 Conexión de motores

Motor paso a paso de bucle abierto de 2 fases serie de 60 mm  Precisión de paso: 5 % Temperatura: 80 ℃ máx . Temperatura ambiente: -20 ℃-+50 ℃ Resistencia de aislamiento: 100 MΩ Mín. 500 V CC Resistencia a la presión: 500 V CA 1 minuto Desviación radial: máxima 0,02 mm (450 g de carga) Desviación axial: máxima 0,08 mm (450 g ) carga) Especificación Modelo Ángulo de paso (°） Longitud del motor (L) Par de retención (Nm) Corriente nominal (A) Resistencia (Ω） Inductancia (mH) Inercia del rotor (g.cm²） Peso (kg) Cables de motor YK60HB65-03A 1.8 67 1.5 2.0 2.4 4.6 570 1.20 6 YK60HB86-04A 1.8 88 2.5 4.0 3.0 6.8 840 1.40 6 YK60HB65-05A 1.8 sesenta y cinco 2.0 5.0 0.30 2.0 490 1.00 4 YK60HB86-05A 1.8 86 3.0 5.0 0.40 1.2 690 1.06 4 Dimensiones Dimensiones Modelo  Diámetro del eje D(mm)  Tipo de eje (mm) Longitud del eje L1 (mm)  Paso-fila L2 (mm)   YK60HB65-03A  8.0 Plano 0.5*15 24 47 YK60HB86-04A  8.0 Plano 0.5*20 24 47 YK60HB65-05A  8.0 Plano 0.5*20 21 50 YK60HB86-05A  8.0 Plano 0.5*15 21 50 Conexión de motores

86mm Series 2 Phase Open-loop Stepper Motor  Step accuracy: 5% Temperature: 80℃Max Ambient temperature: -20℃-+50℃ Insulation resistance: 100MΩ Min 500VDC Pressure resistance: 500VAC 1 minute Radial runout: Maximum 0.02mm (450g load) Axial runout: Maximum 0.08mm (450g load) Specification Model Step Angle (°） Motor Lenth (L) Holding Torque (N.m) Rated Current (A) Resistance (Ω） Inductance (mH) Rotor Inertia (g.cm²） Weight (kg) Motor Leads YK86HB65-04A     1.8 65 3.2 4.0 0.65 3.9 1000 1.7 8 YK86HB80-04A 1.8 80 4.5 6.0 0.4 3.5 1400 2.3 8 YK86HB118-06A 1.8 118 8.5 6.0 0.6 6.5 2700 3.8 8 YK86HB156-06A 1.8 156 12.0 6.2 0.7 9.0 4000 5.3 8 Dimensions Dimensions Model  Shaft Diameter D(mm)  Shaft Type (mm) Shaft Length L1 (mm)    YK86HB65-04A  9.5 Flat 1*25 32 YK86HB80-04A  12.7 Flat 1*25 32 YK86HB118-06A  12.7 Key 5*5*25 32 YK86HB156-06A  15.875 Key 5*5*25 32 Motor connection

110mm Series 2 Phase Open-loop Stepper Motor  Step accuracy: 5% Temperature: 80℃Max Ambient temperature: -20℃-+50℃ Insulation resistance: 100MΩ Min 500VDC Pressure resistance: 500VAC 1 minute Radial runout: Maximum 0.02mm (450g load) Axial runout: Maximum 0.08mm (450g load) Specification Model Step Angle (°） Motor Lenth (L) Holding Torque (N.m) Rated Current (A) Resistance (Ω） Inductance (mH) Rotor Inertia (g.cm²） Weight (kg) Motor Leads YK110HB115-06A     1.8 115 12 6.0 0.44 4.9 7200 6.0 4 YK110HB150-06A 1.8 150 18 6.0 0.8 9.4 10900 8.4 4 YK110HB201-08A 1.8 201 27 8.0 0.6 11.0 16200 11.0 4 Dimensions Dimensions Model  Shaft Diameter D(mm)  Shaft Type (mm) Shaft Length L1 (mm)    YK110HB115-06A  16 Key 4*4*20 35 YK110HB150-06A  16 Key 4*4*20 35 YK110HB201-08A  16 Key 4*4*20 35 Motor connection

ese sistema paso a paso cerrado se puede usar para actualizar los sistemas paso a paso de bucle abierto o reemplazar algunos servosistemas , especialmente en muchas aplicaciones de velocidad pequeña a mediana, como enrutadores CNC , molinos CNC , cortadores láser CNC , plasmas CNC , instrumentos de automatización de laboratorio, plotters, equipos médicos, equipos electrónicos, pequeñas máquinas de embalaje, etc.

YKE2405M-2A-IO Features: New-generation 32-bit DSP control technology, high cost performance A single driver controls two stepper motors of the same model simultaneously, achieving synchronized movement Triple optocoupler isolated digital signal input with one output, compatible with 5V/24V signals, supporting common cathode and common anode wiring methods Employing the latest resonance suppression algorithm, it delivers exceptional stability at medium and low speeds. The current control is smooth, precise, and results in minimal motor heating It features 8 current levels and 16 speed options The start-stop control supports two modes The operating current, speed, and acceleration/deceleration can all be set through the host computer debugging software The lock motor current can be set via the host computer, with the default being 50% of the set current It features overvoltage, undervoltage, overcurrent, and phase sequence protection functions Typical applications: Mainly used for speed control, loading and unloading machines, connecting stations, logistics transportation, transfer equipment, electronic devices, lithium battery equipment, etc. Brief Introduction: YKE2405M-2A-IO is a high-performance one to two stepper drive based on the new generation 32-bit DSP technology. The driving voltage is DC 20-50V, equipped with two motor inputs, which can simultaneously adapt to current continuous output within 4.0A (effective value). The flange is a 42/57mm two-phase open-loop stepper motor, and the drive can set the current and speed by dialing when adapting to different motors. The control mode of this drive is spontaneous pulse speed control, with 4 dials available for 16 speed segments, and can also be set to any speed range through the upper computer; Equipped with three optoelectronic isolated digital inputs and one alarm output; Internally, a servo like control principle, unique circuit design, and superior software algorithm processing are used to ensure smooth low-speed operation of the motor. Precise current control technology greatly reduces motor heating, making it highly effective in devices where users expect low heating, low noise, high stability, and high precision.

   MCC1410C is a PCI-based pulsed motion control card that can control up to four stepper motors or servo motors. Its core is composed of FPGA single chip. With plug and play, hardware linear interpolation, S-type speed control curve and other functions. The position command can be output in single pulse (pulse + direction) or double pulse (CW pulse + CCW pulse).

     MCC1410C is an economical point motion control card with simple programming and multiple functions. It is widely used in semiconductor processing and testing equipment, electronic testing equipment, medical testing equipment, packaging equipment etc.

Typical Application:

High speed and high precision X-Y-Z motion platform control; PC platform machining center; Semiconductor processing and testing equipment, electronic testing equipment, medical testing equipment, packaging equipment.