Unidad de motor paso a paso de circuito cerrado de 2 fases SSD2505M-PLUS

la configuración automática del controlador paso a paso mide los parámetros del motor y configura el control de corriente del motor y los ajustes de ganancia antirresonancia. el controlador de alto voltaje usa una entrada de CA de 90 a 240 VCA y la corriente de salida se puede seleccionar de 0.6 a 2.5 a/fase (pico de seno).

ese sistema paso a paso cerrado se puede usar para actualizar los sistemas paso a paso de bucle abierto o reemplazar algunos servosistemas , especialmente en muchas aplicaciones de velocidad pequeña a mediana, como enrutadores CNC , molinos CNC , cortadores láser CNC , plasmas CNC , instrumentos de automatización de laboratorio, plotters, equipos médicos, equipos electrónicos, pequeñas máquinas de embalaje, etc.

la configuración automática del controlador paso a paso mide los parámetros del motor y configura el control de corriente del motor y los ajustes de ganancia antirresonancia.

Transmission rate: 2x100Mbps (full-duplex), refresh time: 100 axes x 1µs/axis transmission delay = 0.1ms

Supports 1ms synchronization cycle. For synchronization cycles less than 1ms, it can support synchronization in multiples of 250µs. This makes it suitable for real-time-critical applications such as engraving and milling machines and printing presses.

Through precise adjustment of the EtherCAT distributed clock, 300 nodes can be connected over a distance of 120m with 15ns synchronization error and ±20ns synchronization jitter.

Using an RJ45 industrial Ethernet cable, the system allows for quick connection, significantly reducing wiring workload.

  MCC800S high performance motion control card, a PCI bus based motion controller for controlling stepper motors and servo systems. Motion planning through ARM and FPGA, can control 1-8 axes servo or stepper motor, support 2-8 axes linear interpolation, arbitrary 2-axis plane circular interpolation, arbitrary 3-axis space circular/coil interpolation. Each axis has a maximum pulse frequency of 4MHz and an encoder input signal. Interpolation motion has S-type speed curve, small circle speed limit, PWM vector speed follow, backlash compensation, system maximum acceleration limit and other functions.
    MCC800S matched terminal board has multi-channel general I/O, supporting high-speed position latching and position comparison output, continuous interpolation buffer I/O, external bus I/O expansion, greatly satisfying customers' various control requirements for I/O .

     This product is equipped with a dynamic link library under Windows XP/Win7, which is convenient for customers to write their own application software. At the same time, it provides motion debugging software, which can demonstrate the function of this card. it also can be used to tests the operation of motion control cards, motors, drives and motion platforms.    

Typical Application:           

Electronic manufacturing processing and testing equipment, engraving equipment, cutting equipment, placement machine, laser processing equipment, dispensing equipment, spraying, welding equipment, loading and unloading robots, etc.

YKD3505M es un controlador paso a paso digital de alto rendimiento basado en la nueva tecnología DSP de 32 bits de YAKO's.

YKE5405M 5-phase Stepper Drive The YKE5405M is a high-performance digital stepper drive based on a new generation of digital control technology, specifically designed for five-phase motors. Compared to ordinary two-phase stepper drivers, its unique advantages include smoother low-speed operation and less low-speed resonance. At high speeds, it offers better start-stop performance and output levels. Internally, this driver employs a servo-like control principle, a unique circuit design, and superior software algorithm processing. Even under low microstepping conditions, it ensures smooth low-speed motor operation with low vibration and noise. Furthermore, its smooth and precise current control technology significantly reduces motor heat generation, making it highly effective in applications requiring responsiveness and smoothness. Features:  New generation 32-bit DSP control technology, offering high cost-effectiveness, excellent stability, and superior noise and vibration performance.  Optically isolated differential signal input, compatible with 5V/24V signals, adaptable to the signal requirements of different controllers.  Single/dual pulse function, adjustable via DIP switches.  Supports pulse smoothing control and pulse filtering functions, configurable according to actual usage scenarios. Features 16 levels of constant torque microstepping, supporting up to 125,000 microsteps.  Supports 8 levels of current DIP switch adjustment, with a maximum peak current of 4.9A. Maximum pulse response frequency up to 500kHz.  Voltage input range: DC20~50V.  Includes overvoltage, undervoltage, and overcurrent protection detection functions. Applications:  Primarily used in automated equipment for medical devices, semiconductors, and 3C non-standard products. It performs exceptionally well in devices where users expect low heat generation,  low noise, high stability, high response, and high precision. Dimensions: YKE5405M Microstep Setting Table PU/Rev 500 1000 1250 2000 2500 4000 5000 10000 12500 20000 25000 40000 50000 62500 100000 125000 SW8 ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF SW7 ON ON ON ON OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF SW6 ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF SW5 ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF SW4: OFF=Half current          ON=Full Current YKE5405M Current Table Current RMS 0.5 0.7 1 1.5 2.0 2.5 3.0 3.5 Current Peak 0.7 1 1.4 2.1 2.8 3.5 4.2 4.9 SW3 ON ON ON ON OFF OFF OFF OFF SW2 ON ON OFF OFF ON ON OFF OFF SW1 ON OFF ON OFF ON OFF ON OFF YKE5405M Drive operation mode setting Mode Setting SW9 SW10 SW11 SW12 Functions Pulse input method Pulse smoothing control Pulse filter control Default direction control OFF PU+DR Enabler 200KHz Clockwise direction ON CW+CCW+ Disabler 500KHz Counterclockwise direction