YKD2405PC motor paso a paso tipo bus CAN de alto rendimiento yako

la configuración automática del controlador paso a paso mide los parámetros del motor y configura el control de corriente del motor y los ajustes de ganancia antirresonancia. el controlador de alto voltaje usa una entrada de CA de 90 a 240 VCA y la corriente de salida se puede seleccionar de 0.6 a 2.5 a/fase (pico de seno).

YKE2608MH-IO Spontaneous Impulse Stepper Drive  YKE2608MH-IO is a high-performance stepper driver based on a new generation of digital control technology. The control mode of the driver is spontaneous pulse speed control. There are 16 segments of speed can be set by 4 DIP switches, and any speed within the range can be set through the upper computer. Three-way photoelectric isolation digital input, the driver supports motor parameter identification and phase memory functions; Its similar servo control principle, unique circuit design, superior software algorithm processing can make the motor running stably at low speed, and accurate current control technology greatly reduces the motor fever.  Performance:  32-bit DSP control, low noise and superior vibration performance Three-way optocoupler isolated digital signal input, compatible with 5V/24V signals, support common cathode and anode connection mode Using the latest resonance suppression algorithm, it has excellent stationarity at medium and low speed With 8 current, 16 speed optional Running current, speed, acceleration and deceleration can be set in the upper computer debugging software The lock current can be set by the upper computer, the default setting current is 50% Small size, volume 151*94*54 (mm³), weight 0.5kg  Application:  YKE2608MH-IO is mainly used for speed controling, loading machine, unloading machine, docking station, logistics transmission, load shifting equipment, electronic equipment Dimensions: YKE2608MH-IO Roted Speed Setting: The / speed 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 RPM 50 150 250 350 450 550 650 750 850 950 5 10 20 30 40 100 SW8 ON ON ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF SW7 ON ON ON ON OFF OFF OFF OFF ON ON ON ON OFF OFF OFF OFF SW6 ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF SW5 ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF SW4=OFF Control Mode 2 lN1 lN2 statue invalid invalid locking valid invalid CW invalid valid locking valid valid BW SW4=ON Control Mode 1 lN1 lN2 statue invalid invalid locking valid invalid CW invalid valid BW valid valid locking YKE2608MH-IO Current Setting: RMS Default(2.00) 2.57 3.14 3.71 4.28 4.86 5.43 6.00 Peak Default(2.40) 3.08 3.77 4.45 5.14 5.83 6.52 7.20 SW3 ON ON ON ON OFF OFF OFF OFF SW2 ON ON OFF OFF ON ON OFF OFF SW1 ON OFF ON OFF ON OFF ON OFF Terminal Introduction: Symbol Function Specification PWR Power indicator When power on, the green indicator lights up.  TM Work indicator Pulse signal indicator, when there is continuous pulse input, the green indicator light flashes, otherwise the green indicator light is always on. O.C Fault indicator When over current or under voltage, the red indicator lights up. ln1+ input signal 1 electro-optical isolation + Connect signal power, for +5~+24V, when over +24V the ln1- need to connect current-limiting resistance. ln1- input signal 1 electro-optical isolation - It requires: low level 0~0.5V, high level 5~24V. ln2+ input signal 2 electro-optical isolation + Connect signal power, for +5~+24V, when over +24V the ln2- need to connect current-limiting resistance. ln2- input signal 2 electro-optical isolation - It requires: low level 0~0.5V, high level 5~24V. MF+ Motor free signal + Connect signal power, for +5~+24V, when over +24V the MF- need to connect current-limiting resistance. MF- Input signal - When it's in low level, cut off the motor current, and the drive stops working -V Power supply- AC18~80/DC30~110V +V Power supply + +A,-A   Motor connection +B,-B

Motor paso a paso de bucle cerrado de 2 fases serie de 42 mm  Precisión de paso: 5 % Temperatura: 80 ℃ Max Temperatura ambiente: -20 ℃ -+50 ℃ Resistencia de aislamiento: 100MR Min 500VDC Resistencia a la presión: 500VAC 1 minuto Desviación radial: Máximo 0,02 mm (450 g de carga) Desviación axial: Máximo 0,08 mm (450 g ) carga) Especificación Modelo Ángulo de paso (°） Longitud del motor (L) Par de retención (Nm) Corriente nominal (A) Resistencia (Ω） Inductancia (mH) Inercia del rotor (g.cm²） Peso (kg) YK242EC51E1 1.8 79 0.5 1.85 1.0 1.9 77 0.53 YK242EC67E1 1.8 95 0.77 2.3 1.45 2.8 115 0.6 Modelo de unidad adecuado: SSD2205M Dimensiones Dimensiones Modelo Diámetro del eje D (mm) Tipo de eje (mm) Longitud del eje L1 (mm)      YK242EC5 1E1 8 Plano 0.5*15 21 YK242EC67E1 8 Plano 0.5*15 21 Cableado del codificador Negro TIERRA Rojo +5V Azul blanco EA- Azul EA+ Naranja /Blanco EB- Naranja EB+ *Cable motor/codificador: 0,3 m Cable estándar del motor: 1,5 m (opcional 2 m/3 m) Cable estándar del codificador: 1,5 m (opcional 2 m/3 m) Conexión de motores